Super Sniper 4150

Holley Sniper 4 Barrel Fuel Injection Conversion - Self-Tuning Kit + Handheld EFI Monitor.


Våra produkter


Super Sniper 650

Super Sniper EFI 650 - www.holleyefi.se

  • 650 HP version features four 100 Lb/Hr Injectors
  • Compatible with Draw-Thru or Blow-Thru forced induction applications
  • User-friendly Boost Control with handheld adjustability
  • Programmable Target Air Fuel Ratios per Boost level
  • Advanced boost control is available via free Sniper EFI tuning software, including Boost vs RPM and Boost vs Time – Same popular boost control offered in Holley HP and Dominator EFI systems!
  • 2.5 Bar MAP sensor included which safely works on applications up to 21.5 PSI
  • Built-in Single stage progressive nitrous control
  • Dry or Wet Nitrous Support
  • Progressive or Non-Progressive control strategies
  • Lean/Rich AFR Cutoff
  • Time or RPM based Timing Retard and much more!
  • Integrated ignition timing control for precise timing curves
  • Programmable inputs and outputs
  • Three Programmable 0-5V Sensor Inputs for Oil/Fuel/Dome or Nitrous Pressure Sensors
  • Six Programmable Ground Outputs
  • One +5v Reference Output - +5V Power Supply for 0-5v Sensors
  • One Sensor Ground – Ground supply for 0-5v Sensors
  • Internal fuel pressure regulator eliminates the hassle of plumbing an external fuel pressure regulator (Preset to 58.5 PSI) for N/A or Nitrous applications
  • Self-tuning ECU means you don't have to be a computer/tuning wiz to have EFI!
  • Only 4 Wiring Connections Required! (Battery +, Battery-, Switched Ignition & RPM)
  • High-Resolution Full Color Touchscreen for initial Setup, Tuning, and Gauge Displays
  • Simple Calibration Wizard (Answer a few questions about your engine, and it creates the base map, then starts tuning on its own!) - NO laptop required!
  • The included Genuine Bosch LSU 4.9 Wideband Oxygen Sensor provides real-time Fuel Map Learn!
  • OEM Style TPS/IAC and fuel pressure regulator, for years of dependable service
  • Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor installation, with Stainless Steel T-Bolt clamps and a Stainless Steel (Weldable) oxygen sensor flange
  • Throttle body mounted ECU – no extra boxes to mount
  • USB to CAN Communication cable included for easy laptop tuning of advanced controls
  • Dual Pattern bolt on carburetor replacement, designed to fit 4150 Flange & Spread Bore manifolds - (Spread Bore Sealing Plate Part #9006 recommended)
  • Certified to ISO 8846, SAE J1171 & United States Coast Guard Requirements for Ignition Protection & Fire Resistance. Making Sniper EFI the perfect choice for carburetor to marine fuel injection conversions!
  • A Flame Arrestor is REQUIRED for marine installations, such as part number, 720-1 or 720-13
  • Compatible with Holley EFI analog gauges and electronic dashes
  • Patent Pending
      

Super Sniper 1250

Super Sniper EFI 1250 - www.holleyefi.se

  • 1250 HP version features eight 100 Lb/Hr Injectors (Forced Induction)
  • The 800 CFM Main Body will support 700 Horsepower Naturally Aspirated
  • Compatible with Draw thru or blow thru forced induction applications
  • Built-in Single stage progressive nitrous control
  • Programmable inputs and outputs
  • Integrated ignition timing control for precise timing curves
  • Only 4 Wiring Connections Required! (Battery +, Battery-, Switched Ignition & RPM)
  • Internal fuel pressure regulator eliminates the hassle of plumbing an external fuel pressure regulator (Preset to 58.5 PSI) for N/A or Nitrous applications
  • Self-tuning ECU means you don't have to be a computer/tuning wiz to have EFI!
  • High-Resolution Full Color Touchscreen for initial Setup, Tuning, and Gauge Displays
  • Simple Calibration Wizard (Answer a few questions about your engine, and it creates the base map, then starts tuning on its own!) - NO laptop required!
  • The included Genuine Bosch LSU 4.9 Wideband Oxygen Sensor provides real-time Fuel Map Learn!
  • OEM Style TPS/IAC and fuel pressure regulator, for years of dependable service
  • Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor installation, with Stainless Steel T-Bolt clamps and a Stainless Steel (Weldable) oxygen sensor flange
  • Throttle body mounted ECU – no extra boxes to mount
  • USB to CAN Communication cable included for easy laptop tuning of advanced controls
  • Dual Pattern bolt on carburetor replacement, designed to fit 4150 Flange & Spread Bore manifolds - (Spread Bore Sealing Plate Part #9006 recommended)
  • Certified to ISO 8846, SAE J1171 & United States Coast Guard Requirements for Ignition Protection & Fire Resistance. Making Sniper EFI the perfect choice for carburetor to marine fuel injection conversions!
  • A Flame Arrestor is REQUIRED for marine installations, such as part number, 720-1 or 720-13
  • Compatible with Holley EFI analog gauges and electronic dashes
  • Patent Pending

Super Sniper EFI - Supports up to 1250 HP

Totalsumma:
    Till kassan
    Tillagd i varukorgen